Brand: Shaw® Barrels

↓ READ THIS! ↓

This barrel is Made-To-Order.
Typically ships in 12-14 weeks.
^{*Any Configuration*}

↑ READ THIS! ↑

^{Supported Calibers: .172 - .308 (Non-Magnum)
Lengths: 16.5" Min. - 24" Max.
Weight: 2lbs., 11oz. (Based on .308 caliber at Max. Length.)}

YOU ARE ORDERING A BARREL ONLY HERE!
If you wish to have us install this barrel on your receiver, please click this link:
> FIT THIS BARREL TO MY RECEIVER <

• ---

  Finish
  "In The White" for 4140 = no finish.
• Barrel Length
  This is the finished length of the barrel.
  [0.5" added to muzzle if configured as blank.]
• Caliber/Cartridge
  If ordering as a blank, select one of the
  ".___ Caliber Blank No Chamber" options and select "No Chamber" under Chambering.
• Twist Rate
  Twist rate must correspond to the Caliber/Cartridge chosen.
• Chambering
  ^{*Short Chamber - Requires a Finish Reamer to cut the chamber to final dimensions and set headspace.
  If you select this option on a barrel with no receiver threading, the chamber will be cut so that a Go Gauge protrudes +0.150".  
  *Deep Chamber - Chamber is fully cut, but deeper than actual headspace dimension for the given receiver.  A lathe is required to set back the shoulder and hub to set headspace.  Select this option if you lack the appropriate Finish Reamer.  If you select this option on a barrel with no receiver threading, the chamber will be cut so that a Go Gauge sits flush (no protrusion).}
  *See Safety Warning below.
  ^{**Finished Chamber - Available ONLY for the models listed in parentheses!!!
  If you select "No Chamber", regardless of your selection in 'Caliber/Cartridge', then the barrel will not be chambered!} 
  
• Muzzle Treatment
  11 Degree Target Crown is the default crown for all barrels with muzzle threading.
  Muzzle Brake thread pattern for this barrel will be 1/2-28 for all calibers.
  Muzzle Brake adds 2" to finished length when installed.