Sign Up For Exclusive Offers & Product News

First Name:
Last Name:
E-mail Address:
Sign up for the following:




Company Name:
Address:
City:
State:
ZIP:
Mobile Phone:
AR Barrels | Uppers | Rifles
Bolt-Action Rifle Barrels
Rimfire Barrels
Excursion Rifle
 
Product Details

Brand: Shaw® Barrels

↓ READ THIS! ↓

This barrel is Made-To-Order.
Typically ships in 10-12 weeks.
*Any Configuration*

↑ READ THIS! ↑


Supported Calibers: .172 - .458 |  Lengths: 16.5" Min. - 26" Max.
Weight: 9lbs. (Based on .308 caliber at Max. Length.)

YOU ARE ORDERING A BARREL ONLY HERE!
If you wish to have us install this barrel on your receiver, please click this link:
> FIT THIS BARREL TO MY RECEIVER <


  • Finish
    "In The White" for 4140 = no finish.
  • Barrel Length
    This is the finished length of the barrel.
  • Caliber/Cartridge
    If ordering as a blank, select one of the
    ".___ Caliber Blank No Chamber" options and select "No Chamber" under Chambering.
  • Twist Rate
    Twist rate must correspond to the Caliber/Cartridge chosen.
  • Chambering
    *Short Chamber - Requires a Finish Reamer to cut the chamber to final dimensions and set headspace.  Chamber will be short by ≈.050"
    *Deep Chamber - Chamber is fully cut, but ≈.025"-.050" deep.  A lathe is required to set back the shoulder and hub to set headspace.  Select this option if you lack the appropriate Finish Reamer.
    *See Safety Warning below.
    **Finished Chamber -
    Available ONLY for Ruger American rifles using the barrel nut, just like it says.  If you choose this option and the Receiver Thread is NOT Ruger American using barrel nut, Chambering will be Deep Chamber.
    >If you select "No Chamber" for this option, regardless of your selection in 'Caliber/Cartridge', then the barrel will not be chambered
  • Muzzle Treatment
    11 Degree Target Crown is the default crown for all barrels with muzzle threading.
    Muzzle Brake thread pattern for this barrel will be 5/8-24 for all calibers.
    Muzzle Brake adds 2" to finished length when installed.

BULL BARREL DISCLAIMER

This is a BULL BARREL with outside diameter of 1.250".  There is NO taper.  This barrel will NOT fit a sporter style stock.  This is a heavy barrel weighing approximately 9lbs. (will vary slightly based on length and/or caliber).

SAFETY WARNING 

This barrel must be fit to your receiver and finished to the proper headspace by a qualified gunsmith using the proper tools and measuring equipment. The finished barreled action must be test fired with factory ammunition. Failure to follow these warnings may result in injury or death.

CALIFORNIA PROP 65

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

#5 Heavy Bull

Please select the product options:

$190.00

Are You 18 Years of Age or Older?