Bull Contour replacement for the Ruger Precision® Rifle (Non-Magnum) Will re-use all factory mounting hardware.
Finish "In The White" is no finish other than a 240 grit sanding to remove residual machining marks.
Barrel Length This is the finished length of the barrel.
Caliber/Cartridge If an outside party will be cutting the chamber, i.e. you or your gunsmith, select one of the ".xxx Caliber Blank No Chamber" options and select "No Chamber" under Chambering.
Twist Rate Twist rate must correspond to the Caliber/Cartridge chosen.
Chambering -Chambers finish chambered to SAAMI spec when applicable. -If you select "No Chamber" for this option, regardless of your selection in 'Caliber/Cartridge', then the barrel will not be chambered!
Muzzle Treatment Muzzle threaded 5/8-24.
"Ruger®", "10/22®" are trademarks of Sturm, Ruger & Co., Inc. Their use on this website is merely to advertise the sale of compatible components.
BULL BARREL DISCLAIMER
This is a BULL BARREL with outside diameter of 1.000". There is NO taper. This is a heavy barrel weighing approximately 5lbs., 14oz. (will vary slightly based on length and/or caliber).
CALIFORNIA PROP 65
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
